How Do I Replace The Carbon Filter In My Extractor Hood – Cleaning & Care

How Do I Replace The Carbon Filter In My Extractor Hood – Cleaning & Care


How do I replace the carbon filter in my
extractor hood? If your extractor hood uses a recirculation kit, the carbon filter will need to be changed periodically the frequency depends on
how often the hood is used but on average check it every six months. carefully remove the outer cover to access the filter You will see two small screws which hold
the cover in position lift the cover carefully away from the
screws the carbon filter can then be easily
removed if it is coated in grease it will need replacing with a new one please always use original filters slide the new filter into position as shown
then replace the cover over the screws which hold it in position Finally, ensure the cover engages and is
securely held in place by the screws please check and follow these steps If you need further information please refer to the instruction manual to find out more about our cleaning and care please visit the Bosch home appliances website

Leave a Reply

Your email address will not be published. Required fields are marked *